production

PAI Cristal > production

Showing all 7 results

  • nw1_plus_pasta_abrasiva_epossidica_lucidatura_lucidante_polish_barche_compositi_resina_paiboat_paicristal

    NW 1 PLUS
    Supreme

    boat-01polishing

     

    THE POLISHING COMPOUND
    YOU ARE USING
    HAS JUST BEEN OVERTAKEN.

    NW 1 PLUS is finally here and it’s SUPREME.
     

    NW 1 PLUS the polishing compound for composite materials is finally here.
    All new formulation, all new performance, all new cutting action, all new aroma.
    The paste is here and it’s ready for a test.

     

    [maxbutton id="15" url="https://nw1plus.com/" text="FIND OUT NW 1 PLUS" ]

     

    Read more
  • NW 0 heavy cutting compound for hard resins polishings - Pai Boat Composites

    NW 0
    Mould Hard Cut

    boat-01polishing

    NW 0 is a heavy cutting compound for hard resins polishing, developed by Pai Boat Composites – Pai Cristal. NW 0 cutting polishing compound:

    • it is ideal for polishing and refurbishing vinyl ester and hard tooling moulds;
    • it removes P800-P1000 sand scratches;
    • it is a “One step” compound, assuring a high quality finish.

    cut-10-finish-07

    [maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-0-INGLESE-COMPLETO-05-02-20.pdf" ]

     

    Read more
  • PERLA10-abrasive-paste-lacquered-surfaces

    PERLA 10
    Abrasive Paste

    boat-01polishing

     

    Perla 10 abrasive paste

     
    PERLA 10 is a fluid cutting polishing paste for lacquered surfaces, which can efficiently remove P1000-1500 sanding marks, as well as yellowing, oxidation and dullness. PERLA 10 abrasive paste has been developed to speed up the polishing process on painted boats, shortening sanding cycles and reducing polishing steps. At the same time, its balanced formula grants a high gloss level, which exceeds 90 GU. Especially on clear colours, it can be used as a “one step” compound.

    [maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/12/PERLA-10_PASTA-ABRASIVA_TDS_EN.pdf" ]

     
    Read more
  • NW 6 medium cutting polishing compound for coloured gelcoat, grp parts, fiberglass - Pai Boat Composites - Pai Cristal

    NW 6
    Rapid Cut

    boat-01polishing

    NW 6 is a medium cutting polishing compound for coloured gelcoat, grp parts, fiberglass components and lacquered surfaces, developed by Pai Boat Composites – Pai Cristal. NW 6 cutting polishing compound:

    • it is ideal for polishing composites moulded parts and dark coloured and delicate surfaces;
    • it removes marks, dullness and P800-P1000 sand scratches;
    • it restores yellowing and oxidized gelcoats;
    • it guarantees an excellent gloss level, minimising the formation of holograms and minor marks.

    cut-08-finish-08

    [maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-6-INGLESE-COMPLET-31-01-20.pdf" ]

    Read more
  • NW 65 Abrasive Polishing Compound for Gelcoat and Composites - Pai Boat Composites

    NW 65 Abrasive Polish

    boat-02-finishing

    NW 65 is an abrasive polish for resins, gelcoat and grp parts, developed by Pai Boat Composites – Pai Cristal.
    NW 65 abrasive polish:

    • it is ideal for finishing composites plugs and moulds as well as solid surface sanitary parts;
    • it removes minor scratches and small defects as well as swirl marks, which may come from previous coarse compounds;
    • being a blend of micro-abrasives and glossifiers, it leaves a brilliant and deep gloss.

    cut-06-finish-09

    [maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-65-INGLESE-COMPLETO-05-02-20.pdf" ]

    Read more
  • TOPFINISH 2 anti-holograms refinishing polish for Gelcoat - Pai Boat Composites

    TOPFINISH 2 Nano Refinishing Polish

    boat-02-finishing

    TOPFINISH 2 is a nano-abrasives based polish for holograms-free surface refinishing, developed by Pai Boat Composites – Pai Cristal.
    TOPFINISH 2 anti-holograms polish:

    • it is ideal for the extreme refinishing action even of the most delicate and difficult coloured surfaces;
    • it removes holograms, swirls, polishing marks resulting from previous coarse compounds;
    • its balanced blend of nano-abrasives and high performance polishing agents allows to achieve the highest standard of brightness in a safe, simple and quick way.

    cut-05-finish-10

    [maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/TOPFINISH-2-INGLESE-COMPLETO-05-02-20.pdf" ]

     

    Read more
  • NW 1 PLUS heavy cutting polishing compound for resins gelcoat lacquered surfaces - Pai Boat Composites-min

    NW 1
    Premium

    boat-01polishing

    NW 1 is a cutting polishing compound for resins, gelcoat, grp parts, fiberglass components and lacquered surfaces, developed by Pai Boat Composites – Pai Cristal. NW 1 cutting polishing compound:

    • it is ideal for polishing composites moulded parts;
    • it removes marks, dullness and P600-P800 sand scratches;
    • it restores yellowing and high-oxidized gelcoats;
    • it assures a high quality finish without residues and haze.

    cut-10-finish-07

    [maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-1-INGLESE-COMPLETO-31-01-20.pdf" ]

     

     

    Read more
X