PAI Cristal > PERLA 10
Abrasive Paste

PERLA 10
Abrasive Paste

boat-01polishing

 

Perla 10 abrasive paste

 
PERLA 10 is a fluid cutting polishing paste for lacquered surfaces, which can efficiently remove P1000-1500 sanding marks, as well as yellowing, oxidation and dullness. PERLA 10 abrasive paste has been developed to speed up the polishing process on painted boats, shortening sanding cycles and reducing polishing steps. At the same time, its balanced formula grants a high gloss level, which exceeds 90 GU. Especially on clear colours, it can be used as a “one step” compound.
 

Description

PERLA 10 pasta abrasiva

PERLA 10  is a fluid cutting polishing paste for lacquered surfaces, which can efficiently remove P1000-1500 sanding marks, as well as yellowing, oxidation and dullness. PERLA 10 has been developed to speed up the polishing process on painted boats, shortening sanding cycles and reducing polishing steps. At the same time, its balanced formula grants a high gloss level, which exceeds 90 GU. Especially on clear colours, it can be used as a “one step” compound.

 

How to use PERLA 10 abrasive paste

Shake before use, then select an anti-scratch wool pad SL3. Pour a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (800-1500 RPM) while spreading the paste with crossed movements. If necessary, wipe it off with a clean cloth. A hard white foam pad can be used for a more delicate and softer action than wool.

 

 

More info?

 

    COUNTRY:

    YOUR REQUEST:

     

    Additional information

    Packing

    1 kg (600614)

    You may also like…

    X