Mold and Model polishing compounds
Mold and Model polishing compounds – plugs and molds Pai Boat Composites has been studying the different types of surface and hardness as well as the peculiarities of each gelcoat or coating applied, with the purpose of providing a tailor-made process, which guarantees excellent results in short time, with the lowest possible material consumption.
-
Quick View
NW 0
Mould Hard CutRead more
NW 0 is a heavy cutting compound for hard resins polishing, developed by Pai Boat Composites – Pai Cristal. NW 0 cutting polishing compound:
- it is ideal for polishing and refurbishing vinyl ester and hard tooling moulds;
- it removes P800-P1000 sand scratches;
- it is a “One step” compound, assuring a high quality finish.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-0-INGLESE-COMPLETO-05-02-20.pdf" ]
-
Quick View
NW 65 Abrasive Polish
Read more
NW 65 is an abrasive polish for resins, gelcoat and grp parts, developed by Pai Boat Composites – Pai Cristal.
NW 65 abrasive polish:- it is ideal for finishing composites plugs and moulds as well as solid surface sanitary parts;
- it removes minor scratches and small defects as well as swirl marks, which may come from previous coarse compounds;
- being a blend of micro-abrasives and glossifiers, it leaves a brilliant and deep gloss.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-65-INGLESE-COMPLETO-05-02-20.pdf" ]
-
Quick View
TOPFINISH 2 Nano Refinishing Polish
Read moreTOPFINISH 2 is a nano-abrasives based polish for holograms-free surface refinishing, developed by Pai Boat Composites – Pai Cristal.
TOPFINISH 2 anti-holograms polish:- it is ideal for the extreme refinishing action even of the most delicate and difficult coloured surfaces;
- it removes holograms, swirls, polishing marks resulting from previous coarse compounds;
- its balanced blend of nano-abrasives and high performance polishing agents allows to achieve the highest standard of brightness in a safe, simple and quick way.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/TOPFINISH-2-INGLESE-COMPLETO-05-02-20.pdf" ]
-
Quick View
CC7
Clean & check 7Read moreCC7 – Clean & check 7
CC7 is a specific product for a good control of the elimination of sandpaper scratches.
- Through its innovative components, this specific cleaner removes layers that usually hide defects and marks and brings up scratches, holograms and hazes, without affecting the gloss level.
- It may be used to clean also plastics, rubber, glasses and resins, etc.
