Fiberglass Polishing Compounds
Fiberglass Polishing Compounds, polishes and abrasive pastes – Pai Boat Composites
-
Quick View
NW 1 PLUS
SupremeRead more
THE POLISHING COMPOUND
YOU ARE USING
HAS JUST BEEN OVERTAKEN.NW 1 PLUS is finally here and it’s SUPREME.NW 1 PLUS the polishing compound for composite materials is finally here.
All new formulation, all new performance, all new cutting action, all new aroma.
The paste is here and it’s ready for a test.[maxbutton id="15" url="https://nw1plus.com/" text="FIND OUT NW 1 PLUS" ]
-
Quick View
NW 6
Rapid CutRead moreNW 6 is a medium cutting polishing compound for coloured gelcoat, grp parts, fiberglass components and lacquered surfaces, developed by Pai Boat Composites – Pai Cristal. NW 6 cutting polishing compound:
- it is ideal for polishing composites moulded parts and dark coloured and delicate surfaces;
- it removes marks, dullness and P800-P1000 sand scratches;
- it restores yellowing and oxidized gelcoats;
- it guarantees an excellent gloss level, minimising the formation of holograms and minor marks.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-6-INGLESE-COMPLET-31-01-20.pdf" ]
-
Quick View
REX
Xtra mordenteRead moreREX is a heavy cutting compound for hard tooling gelcoat as well as for polishing gelcoat end products, developed by Pai Boat Composites – Pai Cristal.
REX cutting polishing compound:
- it is ideal for polishing and refurbishing vinyl ester and hard tooling moulds;
- it removes P600-P800 sand scratches on gelcoat end products;
- rather than a paste, it is a “One step” polishing cream, and it assures a high quality finish.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2023/03/REX_MORDENTE_TDS_ENG-1.pdf" ]
-
Quick View
NW 65 Abrasive Polish
Read more
NW 65 is an abrasive polish for resins, gelcoat and grp parts, developed by Pai Boat Composites – Pai Cristal.
NW 65 abrasive polish:- it is ideal for finishing composites plugs and moulds as well as solid surface sanitary parts;
- it removes minor scratches and small defects as well as swirl marks, which may come from previous coarse compounds;
- being a blend of micro-abrasives and glossifiers, it leaves a brilliant and deep gloss.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-65-INGLESE-COMPLETO-05-02-20.pdf" ]
-
Quick View
TOPFINISH 2 Nano Refinishing Polish
Read moreTOPFINISH 2 is a nano-abrasives based polish for holograms-free surface refinishing, developed by Pai Boat Composites – Pai Cristal.
TOPFINISH 2 anti-holograms polish:- it is ideal for the extreme refinishing action even of the most delicate and difficult coloured surfaces;
- it removes holograms, swirls, polishing marks resulting from previous coarse compounds;
- its balanced blend of nano-abrasives and high performance polishing agents allows to achieve the highest standard of brightness in a safe, simple and quick way.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/TOPFINISH-2-INGLESE-COMPLETO-05-02-20.pdf" ]
-
Quick View
FLASH-TOUCH
Fast Spray Polish & WaxRead more
FLASH-TOUCH is a performing 3in1 spray product, which cleans, polishes and protects, developed by Pai Boat Composites – Pai Cristal.
FLASH-TOUCH polish spray:- it is extremely easy and quick to apply and remove;
- it leaves a thin resistant protective layer on the surface and allows to achieve a radiant and shiny finishing;
- it is perfectly suitable for gelcoat, composite parts and resins, but it may be used also on paints, plastics, rubber and glasses.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/FLASH-TOUCH-INGLESE-COMPLETO-05-02-20.pdf" ]
- Quick View
-
Quick View
CC 7
Clean & CheckRead more
CC7 is a specific detergent for surface cleaning before polishing, as well as for a good control of the elimination of sandpaper scratches, developed by Pai Boat Composites – Pai Cristal
CC7 cleaner:
- prepares the surface for a clean and safe polishing action, removing any residual contaminant;
- removes layers (potentially left by polishing compounds) that usually hide defects;
- brings up marks and scratches, holograms and hazes;
- it may be used to clean also plastics, rubber, glasses, as well as painted surfaces and lacquers.
-
Quick View
NW 1
PremiumRead moreNW 1 is a cutting polishing compound for resins, gelcoat, grp parts, fiberglass components and lacquered surfaces, developed by Pai Boat Composites – Pai Cristal. NW 1 cutting polishing compound:
- it is ideal for polishing composites moulded parts;
- it removes marks, dullness and P600-P800 sand scratches;
- it restores yellowing and high-oxidized gelcoats;
- it assures a high quality finish without residues and haze.
[maxbutton id="15" url="https://www.paicristal.com/wp-content/uploads/2020/02/NW-1-INGLESE-COMPLETO-31-01-20.pdf" ]
